Nissan GTR AMS Alpha 7 Build

It takes a unique kind of person to drive the mighty Nissan GTR and come to the conclusion that it lacks some punch. After driving this stunning GTR in stock form for quite some time, our long time customer and good friend A.B decided it was time to get serious. There are many tuning options and packages available for the GTR. On this build however we decided that we were going to do it right. The Nissan engineers at the famous Yokohama plant in Japan did things the right way and so will we. This naturally led us straight to AMS.

AMS offers various packages depending on how much power you’re looking for. We chose the Alpha 7 Package for this build. The Alpha 7 package is designed to maximize the output of the stock turbochargers. This is as far as you can go without a turbo upgrade.

Luckily Nissan was kind enough to leave heaps of power potential on the table when they designed the R35 GT-R. The AMS Alpha 7 kit bumps the power and torque of the GTR’s VR38DETT motor by freeing up exhaust flow with a set of properly tuned downpipes and exhaust system, increasing turbo efficiency with improved intakes and a larger intercooler and boosting fuel delivery. These changes unleash the GT-R’s real potential.

Enough intro, lets get into the build.

This is the car back when it was stock. The only mod at this point was the TIG Motorsport Decal.

GTR

Here she is at the TIG Motorsport HQ.

DSC_0033

Time to get this show on the road. The GTR is put on our lift.

DSC_0035

These are the parts we are going to install on the GTR.

12039588_10153519864261023_7560846777102988956_n

12027513_10153519864356023_5324446397925950835_n

The front bumper is taken off and now the fun can begin.

DSC_0044

The bumper is set aside for now but what’s that black box underneath?

DSC_0002

Yeah, its an Akrapovic catback for this GTR build. We are doing this properly. The takumi (specialist) workers from the GTR’s home in Yokohama Japan would be proud.

DSC_0024

And it’s on. Those tips are epic!

DSC_0004

Here they are again. Stunning!

DSC_0008

We could spend all day staring at those carbon Akrapovic tips. Time to continue this build though and move up towards the front with ALPHA downpipes. Check out those welds!

DSC_0075

This is the complete Akrapovic/ALPHA exhaust combo that was installed.

2015-09-06 13.59.54

The Akrapovic/ALPHA combo is on the left. The weedy OEM setup is on the right.

2015-09-06 13.55.53

Time to get serious now and get to work on the VR38DETT motor.

DSC_0080

Right, we’ll grab some tools and get into it.

DSC_0056

The OEM components are out, time to get our AMS goodies installed.

DSC_0084

This is the Alpha intercooler that’s going in.

DSC_0017

OEM intercooler comes out.

2015-09-06 18.44.08

And the ALPHA intercooler is in. Looking good.

11707997_10153519864326023_4515332104116799921_o

The Cobb Access Port will be used to remap the car once everything is put back together.

DSC_0015

Now it’s time to tackle the ALPHA coolant expansion tank.

DSC_0043

The expansion tank is in and looks brilliant. Notice the wooden stick used to keep the bonnet open. The OEM bonnet support was taken off with the front end. A state of the art wooden stick was substituted and did the job until the front end was back on.

12034168_10153519864096023_6893683856360789221_o

Time to pop in the 1,000 CC injectors.

12009618_10153519865781023_5122642631130471442_n

The oil cooler is also installed. Check out that cheeky Evo 8 in the background. It’s feeling very jealous as it watches the ALPHA 7 package being installed.

12029591_10153519864256023_9201586794098421843_o

Here is another photo of the oil cooler. The AMS components are top quality!

12052539_10153519864126023_3251193220085856045_o

Time for a cup of coffee. We take a step back to admire this beast as we load up on caffeine. It’s going to be a long night.

DSC_0086

BAM! The intake is on.

2015-09-09 10.18.26

Time to grab the bumper and put everything back together.

DSC_0025

The Cobb Access Port is fired up and plugged in.

Cobb Nissan R35 GT-R AccessPort V3

Here is the official dyno sheet from AMS for the ALPHA 7 package. Did we reach those numbers? Stay tuned (no pun intended).

Alpha7vsStock-640x434

The AMS build hits the streets! Check out this quick video we made 🙂

 

Time for an update!

Now that the performance mods are done (for now), it’s time to make this GTR look as good as it goes. The aftermarket offers many aero kits for the GTR, we chose to work with Revozport on this build. Why? Simple, because Revozport is ISO 9001:2008 certified by both SGS & TÜV SÜD. They offer top notch build quality and develop and test their parts in a full scale wind tunnel.

The results of this intense testing are impressive to say the least. The overall downforce level is significantly higher than that of the stock GTR setup (as demonstrated in the graph below). This means higher levels of grip and ultimately faster lap times. The Revozport package includes a rear trunk lid, rear spoiler, dive planes, splitters and brake cooling ducts. This kit not only looks that part but it’s functional as well.

OEM vs JCR in Percentage

This is the front splitter, notice the brake cooling ducts.

DSC_0058

The ducts feed cold air into the cooling pipes that deliver cooling to the from brakes.

DSC_0038

The dive planes, necessary on all race cars.

DSC_0002

The rear wing is stunning!

DSC_0011

The rear diffuser all carbon.

DSC_0041

The diffuser looks great with the akrapovic exhaust.

DSC_0044

Up on the lift, looking good!

DSC_0052

The wing looks awesome!

DSC_0034

Time for a photoshoot!

DSC_0046

The rear end.

DSC_0035

DSC_0063

Now that the Revozport aero kit has been installed it’s time to take care of those OEM wheels. What should we go for though? We need something that’s been properly engineered, lightweight and strong. We invite Godzilla to our shop to see what he has to say.

Godzilla suggested we go for a set of HRE wheels. So HRE it is.

Wow Godzilla was right! These HRE P101 wheels are looking good!

And here is the complete build 🙂

This project is far from over. For now though we wanted to say a big thanks to:
1. A.B for choosing TIG Motorsport to build his ALPHA 7 GTR.
2. Our partners for this project PitStop.
3. The top notch support we received from AMS.
4. Revozport for supplying the aero kit.
5. HRE Wheels for supplying the Awesome P101 wheels.
6. The TIG Motorsport photographer (Stig Photography) for documenting this build.

Nissan GTR (Black Edition) Cobb Downpipes

Black Edition Nissan GTR R35 Armytrix Exhaust

TIG Motorsport EVO 9 – Gynkhana 2014

Gymkhana 2014 – First run of the day – 36.57 Sec.

Gymkhana video!

Check out E Gomer tackling a gymkhana course in the TIG Motorsport Evo 9 shop car

 

Tackling the Gymkhana Track in Our Evo 9

Check out this awesome video of E.Gomer piloting the TIG Motorsport shop car around this tight gymkhana track.

 

Evo 9 Action on an Old Airstrip

Throwback Tuesday, a great excuse to share this old video of the TIG Motorsport Evo 9 taking on a challenging course on an old air strip. Filmed with a GoPro hero 2. Enjoy!